General Packaging

Combining flexible custom solutions and diverse application expertise, PVA can prove to be a valuable source for dispensing hot melt adhesives, doming materials, sealants, epoxies, and spray coat finishing.   Choosing a packaging solution means selecting a partner that not only has vast knowledge of dispensing and coating processes, but also maintains the flexibility to conform to your specific requirements, not an out of the box solution. Flexibility, accuracy, quality, and ease of operation make PVA a logical choice.   Common applications • Hot melt adhesives • Gasketing / Bead Dispensing • Doming • Encapsulation • Painting

	CA300  Diaphragm Dispensing Valve The CA300 is a plastic dispensing valve suitable for applying cyanoacrylate adhesives and anaerobic chemistries. This versatile diaphragm dispense valve can be used for single component bead, dot, potting, or encapsulation projects.

	CAM100  Hand Held Diaphragm Dispensing Valve The CAM100 Hand Held Diaphragm Valve is an all plastic handheld valve suitable for dispensing low to medium viscosity cyanoacrylate adhesives and anaerobic chemistries via a unique “floating diaphragm” process.

	CAM100-1LB-1  Anaerobic Dispenser with Controller Easy to use system for manual dispensing. Simply adjust pressure settings, set the shot timer for timed or manual dispense mode and depress the foot pedal to begin dispensing.

	CAM200-1LB-1  Anaerobic Dispensing System Easy to use Anaerobic Dispensing System

	FC100-MC  Stainless Steel Dispensing Valve FC100 with Micrometer Flow Adjust.

	FC300  High Flow Stainless Steel Needle Valve The FC300 is a versatile high flow dispensing valve for any single component bead, dot, potting, or encapsulation project.

	FC300-C  Stainless Steel / Carbide Needle Valve The FC300-C is a high flow dispensing valve for any single component bead, dot, potting, or encapsulation project.

	FCM100  Non-Contact Micro Dispensing Valve The FCM100 is ideal for any low viscosity underfill, encapsulant, conformal coating, and micro dot or bead dispensing project.

	FCM200  Non-Contact Micro Dispensing Valve The FCM200 is suitable for streaming lines or dispensing dots of low to moderate viscosity underfill, encapsulants, conformal coatings, and lubricants. The FCM200 Micro Dispensing Valve features reduced flow path volume and enhanced actuation for cleaner line breaks.

	IR2000  Infrared Heat Curing Chamber PVA’s IR2000 utilizes infrared panels to efficiently cure adhesives and coatings in a controlled, heated environment.

	MX1000 / MX1500  Rod Displacement Meter Mix Systems The rod displacement design in these Meter Mix Systems eliminates metal to metal contact and does not contain wearable dynamic seals. Ideal for using heavily filled, abrasive materials.

	MX3000 / MX4000  Gear Pump Meter Mix Systems Gear pump designs feature continuous material flow with no recharging necessary. PVA pumps are designed specifically for processing a wide range of adhesives and sealants.

	PathMaster  Programming Software PathMaster is PVA’s proprietary Windows® based programming software for use on all PVA automated robots.

	PC100  Plural Component Mixing Valve The PC100 is ideal for any plural component bead, dot, potting, or encapsulation project and can be used for any handheld or automated meter-mix process.

	PC200  Plural Component Mixing Valve The PC200 is ideal for any plural component bead, dot, potting, or encapsulation project.

	PC300  Plural Component Mixing Valve The PC300 is ideal for any plural component bead, dot, potting, or encapsulation project requiring high flow rates.

	PCD200  Plural Component Dynamic Mixing Valve The PCD200 is ideal for two component materials that are difficult to mix or where space is limited and a long static mixer can not be used.

	PT100  Pinch Tube Dispensing Valve The PT100 is a versatile dispensing valve for any single or dual-component bead, dot, potting, or encapsulation project.

	PVA3000  Automated Dispensing System The PVA3000 is a robust motion platform that is configurable for virtually any automated adhesive dispensing application and is ideal for single or dual-component gasketing, potting, or dot placement processes.

	PVA350  Benchtop Selective Coating / Dispensing System The PVA350 is a flexible three or four-axis robot that is suitable for virtually any benchtop or laboratory selective coating and automated dispensing application.

	PVA650  Selective Coating / Dispensing System The PVA650 is ideal for selective conformal coating and dispensing applications that require a high level of accuracy and repeatability in moderate to high volume manufacturing environments.

	UV1000  Ultraviolet Light Curing System The UV1000 is a compact UV curing module suitable for high intensity, rapid curing of UV coatings, adhesives, and inks.

	UV2000  Ultraviolet Light Curing Chamber The UV2000 features Fusion® UV lamps to initiate a fast ultraviolet light polymerization of adhesives and coatings in an efficient inline process.

	UV5000  UV Flood Lamp Curing System The UV5000 is a compact UV curing module suitable for high intensity, rapid curing of UV coatings, adhesives, and inks.