Material Delivery Tanks / Pumps

The PVA-2LTUV has many integrated features including:

• Safety air relief valve at 100 psi
• Accepts bottles of material
• Disposable material path
• Teflon material line supplied with tank
• Safe for use with UV and anaerobic materials
• Top mounted air and material fittings
• Three handles that lock into tank lid for a positive seal

Directions for use: Unthread the three handles mounted on the top of the tank and lift off the lid. Place an uncapped material bottle in the center of the pressure tank. Return the lid to the top of the pressure tank while assuring the dip tube is positioned inside the bottle of fluid. Tighten all three handles evenly. Connect the material line to the fluid delivery system. Turn the red handle 90 degrees to open the air inlet supplying pressure to the tank then adjust the regulator to the correct pressure setting.   

PVA-2LTUV SPECIFICATIONS

Inside Tank Dimensions
6.0” diameter x 10.5” depth

Outside Tank Dimensions
9” diameter x 14.5” height

Body of Tank
Aluminum , black annodized

Gaskets
(3) Viton O-Rings

Max Operating Pressure
100 PSI

Air Inlet
Quick connect air adapter

Material Fitting
1/4” OD tube compression fitting
3/8” OD tube optional

Safety
100 PSI air safety pop valve