Valves

Diaphragm Valves

	CA300  Diaphragm Dispensing Valve The CA300 is a plastic dispensing valve suitable for applying cyanoacrylate adhesives and anaerobic chemistries. This versatile diaphragm dispense valve can be used for single component bead, dot, potting, or encapsulation projects.

	CAM100  Hand Held Diaphragm Dispensing Valve The CAM100 Hand Held Diaphragm Valve is an all plastic handheld valve suitable for dispensing low to medium viscosity cyanoacrylate adhesives and anaerobic chemistries via a unique “floating diaphragm” process.

	CAM200  Hand Held Diaphragm Dispensing Valve The CAM200 is an all plastic handheld valve, featuring a finger switch for ease of use, suitable for dispensing low to medium viscosity cyanoacrylate adhesives and anaerobic chemistries. The CAM200 can be utilized in applications requiring dots, beads, encapsulation, or potting.

Selective Conformal Coating Valves

	FCS300-ES  Stainless Steel Extended Spray Valve The FCS300-ES Extended Spray Valve provides a repeatable, concentrated coating film in a fine, circular pattern with widths ranging from 0.125” to 0.5”.

	FCS300  Stainless Steel Spray Valve The FCS300 spray valve provides a repeatable, concentrated coating film in pattern widths ranging from 0.25” to over 2”. The atomized spray process resulting from the FCS300 will produce conical (round cap) or fan-shaped (flat cap) patterns.

	FCM100  Non-Contact Micro Dispensing Valve The FCM100 is ideal for any low viscosity underfill, encapsulant, conformal coating, and micro dot or bead dispensing project.

	FCM200  Non-Contact Micro Dispensing Valve The FCM200 is suitable for streaming lines or dispensing dots of low to moderate viscosity underfill, encapsulants, conformal coatings, and lubricants. The FCM200 Micro Dispensing Valve features reduced flow path volume and enhanced actuation for cleaner line breaks.

	FC100-C  Non-Atomized Flow Coating Valve The FC100-C flow coating valve produces a sharp, non-atomized stream of low viscosity fluids and coatings. This precise application process is ideal for solvent-based chemistries.

	FC100-CF  Non-Atomized Film Coating Valve The FC100-CF film coating valve produces a sharp, non-atomized stream of low viscosity fluids and coatings.

	FC100-MC  Stainless Steel Dispensing Valve The FC100-MC is a versatile dispensing valve for single-component bead, dot, potting, or encapsulation projects.

	FC100  Stainless Steel Dispensing Valve The FC100 is a versatile dispensing valve for single-component bead, dot, potting, or encapsulation projects.

	RC200  Radial Coat Valve The RC200 Radial Coat Valve sprays low viscosity fluids onto the inside walls of a cylinder to create a layer of coating.

Micro Dispensing Valves

	VPX-2K  Volumetric Pump The VPX-2K Volumetric Pump is a dual dispenser designed for applying small volumes of 2-part adhesives in lines or dots with a high level of control.

	VPX-450  Volumetric Pump The VPX-450 Volumetric Pump is designed for applying small volumes of fluids in lines or dots with a high level of control.

	VPX100  Volumetric Pump Servo driven, high precision auger valve for SMT applications

	FCM100  Non-Contact Micro Dispensing Valve The FCM100 is ideal for any low viscosity underfill, encapsulant, conformal coating, and micro dot or bead dispensing project.

	FCM200  Non-Contact Micro Dispensing Valve The FCM200 is suitable for streaming lines or dispensing dots of low to moderate viscosity underfill, encapsulants, conformal coatings, and lubricants. The FCM200 Micro Dispensing Valve features reduced flow path volume and enhanced actuation for cleaner line breaks.

Spray Valves

	FCS100-ES  Stainless Steel Extended Spray Valve The FCS100-ES extended spray valve provides a repeatable, concentrated coating film in circular pattern and excellent edge definition and coating transfer efficiencies.

	FCS300-ES  Stainless Steel Extended Spray Valve The FCS300-ES extended spray valve provides a repeatable, concentrated coating film in circular pattern with widths ranging from 0.125” to 0.5” and with excellent edge definition.

	FCS100  Stainless Steel Spray Valve The FCS100 spray valve provides a repeatable, concentrated coating film in conical (round cap) or fan-shaped (flat cap) patterns.

	FCS300  Stainless Steel Spray Valve The atomized spray process resulting from the FCS300 produces conical (round cap) or fan-shaped (flat cap) patterns that provide a repeatable, concentrated coating film.

	RC200  Radial Coat Valve The RC200 Radial Coat Valve sprays low viscosity fluids onto the inside walls of a cylinder to create a layer of coating.

High Flow Dispensing Valves

	SB200  High Flow Dispense Valve The SB200 is ideal for 1-component filling, potting, gasketing, and dot dispensing.

	FC300  High Flow Stainless Steel Needle Valve The FC300 is a versatile high flow dispensing valve for any single component bead, dot, potting, or encapsulation project.

	FC300-C  Stainless Steel / Carbide Needle Valve The FC300-C is a versatile high flow dispensing valve for any single component bead, dot, potting, or encapsulation project.

	FC100-MC  Stainless Steel Dispensing Valve FC100 with Micrometer Flow Adjust.

	FC100  Stainless Steel Dispensing Valve A versatile, high pressure dispensing valve for single-component bead, dot, potting, or encapsulation projects.

Positive Displacement Metering Valves

	MV100  Positive Displacement Metering Valve The MV100 is a true positive displacement metering valve capable of dispensing small deposits of material in a highly accurate process.

	MV200  Positive Displacement Metering Valve The MV200 is a true positive displacement metering valve capable of dispensing small deposits of material in a highly accurate process.

	MV300  Positive Displacement Metering Valve The highly accurate MV300 valve's deposit volume is determined by the valve’s stroke adjustment setting and is not affected by variations in viscosity or material pressure.

	MV400  Positive Displacement Metering Valve The MV400 is a true positive displacement metering valve capable of dispensing deposits of material in a highly accurate process. The deposit volume is determined by the metering cylinder’s stroke adjustment setting and is not affected by variations in viscosity or material pressure.

	MV500  Positive Displacement Metering Valve The MV500 is a true positive displacement metering valve capable of dispensing deposits of material in a highly accurate process.

	MV600  Positive Displacement Metering Valves The MV600 is a true positive displacement metering valve capable of dispensing deposits of viscous materials in a highly accurate process.

Mixing Valves

	DX100  Dynamic Mixing Valve Use the DX100 Dynamic Mixing Valve for difficult to mix, two component materials.

	PC100  Plural Component Mixing Valve The PC100 is ideal for any plural component bead, dot, potting, or encapsulation project can be used for any handheld or automated meter-mix process.

	PC200  Plural Component Mixing Valve The PC200 is ideal for any plural component bead, dot, potting, or encapsulation project and can be integrated for automated manual dispensing.

	PC300  High Volume Mixing Valve The PC300 is ideal for any plural component bead, dot, potting, or encapsulation project requiring high flow rates.

	PCD200  Dynamic Mixing Valve The PCD200 is ideal for difficult to mix two component materials and wide ratio materials. Use in applications such as potting, ensapsulation, casting and form in place gasketing.

Servo Controlled Valves

	VPX100  Volumetric Pump Servo driven, high precision auger valve for SMT applications

	SVX  Servo-Controlled Auger Valve The SVX Auger Valve is designed for processing micro volumes of material in precise, repeatable patterns. The auger rotation is controlled by a brushless servo motor for a highly controlled process.

	SV200  Servo-Controlled Auger Valve The SV200 Auger Valve is ideal for dispensing 2-part, premixed epoxies and pastes in dot and bead patterns.

	SV100  Servo-Controlled Auger Valve The SV100 is ideal for dispensing all medium to high viscosity pastes, epoxies, and abrasive compounds in dot and bead patterns. A dedicated servo controller, the SVC100, permits customized valve settings for handheld or automated applications.

	SD5000  Servo-Controlled Syringe Pump The SD5000 is a fully programmable servo driven system designed for precise metering of single component materials such as anaerobics, cyanoacrylates, urethanes, epoxies, and silicones. The system is typically used for applications requiring minimal flow rates for low to medium viscosity materials.

Other Valves

	PT100  Pinch Tube Dispensing Valve The PT100 is a versatile dispensing valve for any single or dual-component bead, dot, potting, or encapsulation project.

	RC200  Radial Coat Valve The RC200 Radial Coat Valve sprays low viscosity fluids onto the inside walls of a cylinder to create a layer of coating.