Film builds as low as 0.01 mm (0.0005") can be achieved across the desired surface. The PVA2000 selective coating process results in greater material utilization with transfer efficiencies of 99%, a significant increase over dip, brush, or hand spray applications.
The PVA2000 is a flexible, robust motion platform with an overhead
gantry system featuring ball screw slide, driven by brushless DC servo
motors. Optical encoder feedback on all axes ensures a closed-loop
process and provides long-term reliability.
The system offers motion in all axes simultaneously allowing the programmer to contour application heads around intricate devices and adjust the spray pattern width on the fly.
The PVA2000 also comes standard with three-axes of programmable motion. In addition to traditional XYZ motion, the FC100 flow coating valve is mounted on a tilt actuator to allow angled access to the side of components and shadowed areas.
For greater motion capability, it is available with patented fourth-axis technology. PVA's fourth-axis motion allows rotation of the entire dispense head permitting access to all sides of a component. PVA's fourth-axis option is the most capable motion platform configuration for eliminating masking and working around densely populated assemblies.
The PVA2000 can be configured with any combination of spray and dispense valves to best optimize your process and it is fully supported by easy-to-use PathMaster® Software.
0 to 700 mm/sec (0 to 27.6 in/sec)
11.4 kg (25 lbs)
Standard Work Area
500 mm x 500 mm x 100 mm (19.68" x 19.68" x 3.94")
+/- 25 microns (+/-0.001")
0.005 mm (0.0002")
120V, 220V, +/-10%, 50-60 Hz
Air Supply Requirements
80 PSI dry, unlubricated air
150 cfm minimum
Programmable up to 80 ft/min (24.4 m/min)
Adjustable between 940 mm and 965 mm (37" and 38")
Conveyor Process Flow
Programmable right to left or left to right
Conveyor Edge Clearance
SMEMA standard 0.185" (5 mm)
Belt Conveyor Weight Limit
5 pounds per section
Chain Conveyor Weight Limit
15 lbs per section
317 kg (700 lbs)