Back to all products
MCCS-SYS-2 Manual Conformal Coating System

MCCS-SYS-2


Manual Conformal Coating System

  • Spray one material from one pressure tank 
  • Dispense a second material from a cartridge  

Description of System Operation: 

  1.  First material is poured into stainless steel pressure pot. 
  2.  Second material cartridge is placed in reservoir. 
  3.  Air pressure is applied to valve handles. 
  4.  Air pressure is applied to feed both materials to valves. 
  5.  Triggers on handles are depressed to begin dispensing. 
  6.  Fluid pressure is individually adjusted to control flow. 

Spray Valve 

  • Stroke adjuster on valve can be adjusted to control flow rate. 
  • Atomizing air pressure is adjusted to spray material. 

Dispense Valve 

  • Stroke adjuster on valve can be adjusted to control flow rate. 

PVA also offers optional accessories for this system: 

  • Two solvent stands to hold valve handles 
  • FCS1-SP – spray valve spare parts kit 
  • FC1-SP – dispense valve spare parts kit 
  • B62-0801-SP – system spare parts kit 

Resources